MOBILE HACKING CODES AND SECRET!!!HIDDEN

MOBILE HACKING CODES AND SECRET!!!HIDDEN

Secret Codes Of Nokia Mobiles:
Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.
1610/1630
*#170602112302# (software version)
1610/1611
IMEI number: -*# 0 6 #Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #Simlock status: - # 9 2 7 0 2 6 8 9 #
2110
*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model)*#682371158412125# (software version)
NOKIA3110
*#06# -IMEI
*#3110# -Software version
##002# - allows to turn off voice mail.
*#7780# - restore factory settings
*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)
*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:
6232 (OK)displays month and year of production date (ie "0198")
7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")
7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")
9268 (OK) -displays serial number
37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !
87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)
* # 9 2 7 0 2 6 8 9 # -Simlock info
*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)
*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)
*#77# (call) -(work s only in some networks)
*#33/35# (call -displays message "Service not active".
**31# (call) -your no. will not be showed to others when you make a call

3210
*#06# -IMEI
*#0000# -software version
*#92702689# (or *#war0anty#)- enters service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system Enhanced Full Rate .
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
xx# -Replace xx with desired phonebook entry - press # and you will see it on display.
51XX
*#06# -IMEI
*#0000# - Software version
*#92702689#( or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
#pw+1234567890+1 -provider lock status
#pw+1234567890+2 -Network lock status
#pw+1234567890+3 -Provider lock status
#pw+1234567890+4 - SimCard lock status
NOKIA 61XX
*#06# -IMEI
*#0000# ;-*#99 99# (Nokia 6130)
*#92702689# (or *#war0anty#) Software versionEnter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy.
#4720# -Turns off battery save mode.
NOKIA8810
*#06# - IMEI
*#0000# -Software version
*#92702689# (or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system - Enhanced Full Rate.
#3370# -Turns off sound encoding system - Enhanced Full Rate.
*4720# -Turns on battery save mode - saves about 30 % of energy
#4720# -Turns off battery save mode - saves about 30 % of energy

NOKIA99OO
*#06# -IMEI
*#682371158412125# -Software version
*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.

NOKIA 911O
*#06# IMEI
*#0000# SOFTWARE VERSION
*3370# Turns on sound encoding system - Enhanced Full Rate.
#3370# Turns off sound encoding system - Enhanced Full Rate.
*4720# Turns on battery save mode - saves about 30 % of energy.
#4720# Turns off battery save mode.

NOKIA 81XX
*#06# IMEI*#8110# Software versionxx# Replace xx with desired phonebook entry - press # and you will see it on display
*#92702689# (or *#warOanty#)
"Warranty code:" - you have to enter one of the following codes:
9268 (OK) displays IMEI (International Mobile Equipment Identification)
6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)
7832 (OK) displays date of purchase
7332 (OK) displays date of repair or upgrade
37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!
87267 (OK) transmits user data/move data do service PC

Motorola Codes:

Motorola 920---------------
Press menu and type one of these numbers and press OK:
11 = Status Review13 = Available Networks14 = Preferred Networks22 = Select Keypad Tones25 = Require SIM Card PIN26 = Language Selection32 = Repetitive Timer33 = Single Alert Timer34 = Set IN-Call Display35 = Show Call Timers36 = Show Call Charges37 = Call Charge Settings38 = Reset All Timers43 = Reset All Timers45 = Show Last Call46 = Total For All Calls47 = Lifetime Timer51 = Change Unlock Code52 = Master Reset53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)54 = New Security Code55 = Automatic Lock63 = Battery Saving Mode
Free call tip
1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.
You should now be able to talk without being billed.
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.


Motorola 930--------------
Press menu and type one of these numbers and press OK:
11 = Status Review13 = Available Networks14 = Preferred Networks22 = Select Keypad Tones25 = Require SIM Card PIN26 = Language Selection32 = Repetitive Timer33 = Single Alert Timer34 = Set IN-Call Display35 = Show Call Timers36 = Show Call Charges37 = Call Charge Settings38 = Reset All Timers43 = Reset All Timers45 = Show Last Call46 = Total For All Calls47 = Lifetime Timer51 = Change Unlock Code52 = Master Reset53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)54 = New Security Code55 = Automatic Lock63 = Battery Saving Mode
Free call tip
1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.
You should now be able to talk without being billed.
Motorola 930
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.


Motorola 6200--------------

(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
These countries has been reported working:
UK (Orange)AU
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector


Motorola 7500-------------

(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
These countries has been reported working:
IT (model: F16 HW: 5.2 SW: 2.1)
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.
Pin OutsNumbered right to left, keypad up, battery down looking
1. Gnd2. Pos3. True data (TD) (input)4. Complimentary data (CD) (input)5. Return data (RD) (output)6. Audio gnd7. Audio out8. Audioin

Motorola 8200--------------

(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector


Motorola 8400-------------

(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground2. V+3. True data (TD) (input)4. Downlink - Complimentary data (CD) (input)5. Uplink - Return data (RD) (output)6. GND7. Audio Out - on/off8. Audio In9. Manual Test - ???10. Battery Feedback11. Antenna connector


Motorola 8700--------------

*#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
These countries has been reported working:
AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.


Motorola CD 160---------------

Press menu and type one of these numbers and press OK:
11 = Status Review13 = Available Networks14 = Preferred Networks22 = Select Keypad Tones25 = Require SIM Card PIN26 = Language Selection32 = Repetitive Timer33 = Single Alert Timer34 = Set IN-Call Display35 = Show Call Timers36 = Show Call Charges37 = Call Charge Settings38 = Reset All Timers43 = Reset All Timers45 = Show Last Call46 = Total For All Calls47 = Lifetime Timer51 = Change Unlock Code52 = Master Reset53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)54 = New Security Code55 = Automatic Lock63 = Battery Saving Mode
Free call tip
1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.
You should now be able to talk without being billed.


Motorola CD 520----------------

Press menu and type one of these numbers and press OK:
11 = Status Review13 = Available Networks14 = Preferred Networks22 = Select Keypad Tones25 = Require SIM Card PIN26 = Language Selection32 = Repetitive Timer33 = Single Alert Timer34 = Set IN-Call Display35 = Show Call Timers36 = Show Call Charges37 = Call Charge Settings38 = Reset All Timers43 = Reset All Timers45 = Show Last Call46 = Total For All Calls47 = Lifetime Timer51 = Change Unlock Code52 = Master Reset53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)54 = New Security Code55 = Automatic Lock63 = Battery Saving Mode
Free call tip
1 Enter the phone number2 Enter OK3 Type *#06#4 Press Button C5 And finally press the button for power off.
You should now be able to talk without being billed.


Motorola d460--------------

#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 1 [pause] [ok]You now have to press the [MENU] and scroll to the 'EngField Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3[pause] 0 [pause] [ok]This only works with some versions of software.
What's the use of RBS:
Get Distance From Base Station - Place a call, when itis answered, press [MENU] until 'Eng Field Option' isdisplayed, press [OK], select 'Active Cell', press [OK],press [MENU] until 'Time Adv xxx' appears, where xxx isa number. Multiply this number by 550, and the result isthe distance from the RBS (Radio Base Station), inmeters.
Get Signal Quality - press [MENU] until 'Eng FieldOption' is displayed, press [OK], select 'Active Cell',press [OK], press [MENU] until 'C1' appears. This is thesignal quality. If it becomes negative for longer than 5seconds, a new cell is selected.


Motorola V3688---------------

#06# for checking the IMEI (International Mobile Equipment Identity)
Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.To Disable EFR press [][][] 119 [] 0 [] OK
NOTE: Nothing appears on Screen.


Ericsson Mobile Secret Codes:
T10
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release) >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following keystroke instead: First '0' then '#'.
Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!
A way to (un)lock your cell phone on to the network(subset):1. Press <**<2. tac =" Type" codefac =" Final" codesnr =" Serial" numbersp =" Spare">*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<**<>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
<**<>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)
The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:
<**<> key for a second or two The option Menu size turns up Choose 'yes' and go from there.
An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.
Free phone calls using the GA628
This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...
Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!
Another variant of the code
Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

Posted in: MOBILE TRICKS